BANKjet 2500 Inkjet Teller Receipt Validation Printer
Download the BANKjet 2500 spec sheet PDF
View our screen friendly spec sheet
Order by calling
Meet the affordable, compatible replacement for whatever teller station printer you're using now. Engineered to be highly cost-effective and remarkably worry-free, the BANKjet 2500 validation printer is renowned for its performance, compact footprint and seamless compatibility. Your tellers' lives just got a whole lot easier…BANKjet 2500 Highlights
Frequently Asked Questions
Where can I order paper?
Paper can be ordered online through our TransAct Supplies website at www.transactsupplies.com
Where can I order parts?
Parts can be ordered online through our TransAct Supplies website at http://www.transactsupplies.com
Do you offer a repair service?
Yes, we offer repair at one of Repair Centers in and outside the United States. Please use our convenient RMA web form.
What communication interface do I have?
The Bankjet 2500 printer comes with both a USB and 9pin Serial interface.
What printer driver should I be using?
The correct printer driver depends on what Operating System you are using. You can find the drivers on our website. Drivers & Downloads
What are the media specifications for my printer?
(Note: All Ithaca life testing has been performed with TMP paper.)
What are the printable areas of the receipt paper and validation form?
Receipt Printing, Tear off Position
NOTE: In wide print zone mode it is possible to print off the left side of the form. This should be avoided.
How do I replace the ink cartridges in my printer?
Loading Ink Cartridge and Paper
Note 1: FIRST TIME INSTALLATION: An ink cartridge can be found in the pouch that shipped with your printer.
Note 2: When installing new ink cartridge and a new paper roll for the first time, you may leave the cover open until you have installed the ink cartridges, and the paper roll.
Installing Ink Cartridge
1. Remove the new ink cartridge from their sealed pouch and remove the Mylar tape from the face of the new ink cartridge. (Holding the cartridge by the tab will ensure a clean installation.)
How do I change paper?
1. Open the printer’s paper cover.
2. Insert the new paper roll so that it unwinds from the bottom and rests on the top of the front cover.
3. Close the paper cover.
4. The paper will load automatically.
How do I place the printer into Self-Test Mode?
1. Toggle the Power Switch to place the printer into STANDBY/OFF mode. (The power indicator light will be off.)
2. Press and hold the FEED Button.
3. While holding the FEED Button, Toggle the Power Switch.
4. When the red, error indicator light blinks, release the FEED Button.
5. Follow the directions printed on the receipt to select the desired TEST option.
In Windows 8.1/Windows 10, my BANKjet 2500 printer using the USB interface is not showing up or reconginzed/assigned on a USB port?
In Windows 8.1/Windows 10, before installation, please change the "USB Mode" option in the internal configuration of the BANKjet 2500 printer to “USB Printer Only”. See Manual Configuration under the Quick Reference section.
2500 printers with USB interface built before June 2009 will not be compatible with Windows 8.1/10. You can verify the printer build date by looking at the Serial label on the bottom of the printer. The build date must be F09 or better. (Where a=JAN, B=FEB, C=MAR, etc. and two digit year.)
You need the “USB Mode” option in the Configuration to work in Windows 8.1/10 as this option needs to be set to “USB Printer Only”. If this option is not available in the Configuration of your 2500 printer, it is not Windows 8.1/10 compatible.
This option is not available in units older than June 2009 and some specialized or proprietary firmware.
You would need to replace with a 2500 of newer vintage with standard firmware. Standard firmware may not work with systems that require proprietary or special firmware.
NOTE: The 2500 printer is no longer manufactured. There is no replacement model at this time.
Why do I get an “Error encountered in opening lang mon Registry” when trying to save changes in the properties of the Windows driver?
The “Lang Mon” error is due to the driver's lack of privileges writing to the registry.
If you encounter this error, please use the “TransactPrinterProperties.exe” program found in the Utilities folder that comes with the Windows drivers.
Note: You must Right Click the TransactPrinterProperties.exe program and select Run as administrator to allow the changes to be saved to the registry.
Change values as you want them, and then click the Save Changes button.
Then Select Yes to allow the Windows Print Spooler to be restarted for the change to take effect.
To send a printer in for repair
US Repair Operations
Transact Technologies Western Region Repair Center
Like. Connect. Follow. Watch.
Tel: 877.748.4222 | Fax: 203.949.9048
© 2021 Transact Technologies, Inc. - All Rights Reserved
News & Events
Service & Support
Parts & Supplies