Home Banking POS & Kiosk Casino & Gaming Food Safety Terminals TransAct Services Investors About Us
CONTACT US   |   TECHNICAL SUPPORT   |   SITE MAP



Epic 950® Thermal Slot Machine Ticket Printer

RS232 Serial Communications Interface PCB

The RS232 Serial interface connector is a 14 position Molex Minifit Jr®., part number 39-30-1140, which mates with Molex part number 39-01-2140 or equivalent.
 

 
 
Serial Communication PCB Pin-Outs
PIN #
FUNCTION
I/O
1
MRESET (Active low)
I
2
Not Connected
N/C
3
+12 VDC
I
4
Not Connected
N/C
5
GND
-
6
+24VDC
-
7
GND
-
8
+24VDC
-
9
Bezel Lamp – Switched +24VDC
O
10
FGND
-
11
RS232 RXD
I
12
RS232 TXD
O
13
DTR
O
14
RTS
O

Table 1. Serial Communication PCB Pin-Outs
Default Communication Settings
 
The RS-232C interface default configuration settings are:
 
Baud Rate: 9600 BPS
Data Bits: 8 Bits
Parity: None
Stop Bits: 1
Handshaking: XON/XOF
Receive Error: Prints
Input Buffer 8,192 bytes
 
These communications settings may be altered only through the use of the CONFIG program, special printer configuration software available from TransAct. Contact TransAct Technical Support for further information on this utility.
 
USB Communications Interface PCB
 
The USB Communications PCB contains two connectors.

  • Power - 4 position Molex Minifit Jr®., part number 39-30-1040, which mates with Molex part number 39-01-2040 or equivalent.

  • USB Communications - Type B USB connector

     
    USB Communications PCB Pin-Outs
    USB Connector
     
     
    Pin #
    FUNCTION
    I/O
    1
    VBUS
    -
    2
    D-
    I/O
    3
    D+
    I/O
    4
    GND
    -
    Power Connector
     
     
    Pin #
    FUNCTION
     
    1
    +24VDC
    -
    2
    GND
    -
    3
    GND
    -
    4
    FGND
    -
    Table 2. USB Communication PCB Pin-Outs
     
     


    NETPLEX Communications Interface PCB
     
    The NETPLEX Communications interface connector is a 10 position Molex Minifit Jr®., part number 39-30-1100, which mates with Molex part number 39-01-2100 or equivalent.
     
     
     
     
    NETPLEX Communication PCB Pin-Outs
    PIN #
    FUNCTION
    I/O
    1
    MRESET (Active low)
    I
    2
    RXD
    I
    3
    +12 VDC
    I
    4
    TXD
    O
    5
    SGND
    -
    6
    +24VDC
    -
    7
    GND
    -
    8
    +24VDC
    -
    9
    Bezel Lamp – Switched +24VDC
    O
    10
    GND
    -
    Table 3. NETPLEX Communication PCB Pin-Outs
     
     

    Universal USB/NETPLEX Communications Interface PCB
     
    The Universal USB/NETPLEX interface supports both USB and NETPLEX communications. This interface contains three connectors:
     
    • Power - 4 position Molex Minifit Jr®., part number 39-30-1040, which mates with Molex part number 39-01-2040 or equivalent.

    • NETPLEX communications- 6 position Molex Minifit Jr®., part number 39-30-1060, which mates with Molex part number 39-01-2060 or equivalent.

    • USB Communications - Type B USB connector.





     
    Universal USB/NETPLEX Communication PCB Pin-Outs
    USB Connector
     
     
    Pin #
    FUNCTION
    I/O
    1
    VBUS
    -
    2
    D-
    I/O
    3
    D+
    I/O
    4
    GND
    -
    Power Connector
     
     
    Pin #
    FUNCTION
     
    1
    +24VDC
    -
    2
    GND
    -
    3
    GND
    -
    4
    FGND
    -
    NETPLEX Connector
     
     
    Pin #
    FUNCTION
     
    1
    MRESET (Active low)
    I
    2
    RXD
    I
    3
    +12 VDC
    I
    4
    TXD
    O
    5
    SGND
    -
    6
    Bezel Lamp – Switched +24VDC
    O
    Table 4. Universal USB/NETPLEX Communication PCB Pin-Outs


    Dual Port NETPLEX Communications Interface PCB
     
    The Dual Port NETPLEX Communications interface contains three connectors

    • NETPLEX Communications. - 10 position Molex Minifit Jr®., part number 39-30-1100 for NETPLEX connections which mates with Molex part number 39-01-2100 or equivalent.

    • I2C Communications - 2 modular RJH connections The connectors are electrically connected to allow daisy chaining of multiple devices.
       
     
     







     
     
    NETPLEX Communication PCB Pin-Outs
    NETPLEX Connector
     
     
    Pin #
    FUNCTION
    I/O
    1
    MRESET (Active low)
    I
    2
    Not Connected
    N/C
    3
    +12 VDC
    I
    4
    Not Connected
    N/C
    5
    GND
    -
    6
    +24VDC
    -
    7
    GND
    -
    8
    +24VDC
    -
    9
    Bezel Lamp – Switched +24VDC
    O
    10
    GND
    -
     
     
     
    I2C Port
     
     
    Pin #
    FUNCTION
     
    1
    RESET
    I
    2
    SCL
    I
    3
    SDA
    I/O
    4
    GND
     
     
     
     
    Table 5. Dual Port NELTPLEX Communication PCB Pin-Outs
     
     


    Dual Port RS232 Communications Interface PCB
     
     
    The Dual Port RS232 Communications interface contains three connectors

    • RS232 Communications14 position Molex Minifit Jr®., part number 39-30-1140 which mates with Molex part number 39-01-2040 or equivalent.

    • I2C Communications -2 two modular RJH connections for a secondary I2C port. The two modular connectors are electrically connected to allow daisy chaining of multiple devices.
       
     
     






     
     
    NETPLEX Communication PCB Pin-Outs
    RS 232 Connector
     
     
    Pin #
    FUNCTION
    I/O
    1
    MRESET (Active low)
    I
    2
    Not Connected
    N/C
    3
    +12 VDC
    I
    4
    Not Connected
    N/C
    5
    GND
    -
    6
    +24VDC
    -
    7
    GND
    -
    8
    +24VDC
    -
    9
    Bezel Lamp – Switched +24VDC
    O
    10
    FGND
    -
    11
    RS232 RXD
    I
    12
    RS232 TXD
    O
    13
    DTR
    O
    14
    RTS
    O
     
     
     
    I2C Port
     
     
    Pin #
    FUNCTION
     
    1
    RESET
    I
    2
    SCL
    I
    3
    SDA
    I/O
    4
    GND
     
    Table 6. Dual Port RS232 Communication PCB Pin-Outs
     
     
     
    Bezel Lamp Connector
    The bezel connector is a Molex Minifit Jr®, part number 39-01-4032 and will mate with a Molex part number 39-01-4030 or equivalent.

    Figure 11. Bezel Lamp Connector Location and Connector Information
     
    Bezel Lamp Connector Pin-Outs
    PIN #
    FUNCTION
    1
    Modulated +24VDC
    2
    Not Connected
    3
    GND
     
    Table 7. Bezel Power Connector Pin-Outs
     
     

     
Tel: 877.748.4222     Fax: 203.949.9048
© 2006 TransAct Technologies, Inc. All Rights Reserved.