|
BANKjet® 2500 Inkjet Teller Receipt Validation Banking Printer
Manual Configuration:
This mode allows manual configuration of the printer.
To enter manual configuration mode:
1. Power the printer off using the power switch.
2. Press and Hold the Form button.
3. Power the printer on using the Power Switch while still holding the Form button.
4. Continue to Hold the Form button until the red LED blinks slowly.
5. When you see the slow blinking red LED light, release the Form button.
6. The printer will print the current configuration listing.
To navigate the Configuration Mode:
1. Press and hold the Form button to enter a group.
2. Press and hold the Form button within a group to change the item’s option.
3. Press and Release the Form button within a group to go to the next item.
4. Press and Release the Form button to go to the next group.
Once all changes are made you must save the configuration.
To save the configuration:
1. Press and release the Form button until you reach "SAVE the configuration and EXIT."
2. Press and hold the Form button for 5 seconds.
3. Printer will print out the changed configuration for review.
4. Press and release the Form button to Save the Configuration.
5. Printer will reset to a ready state.
|
What do you want to do?
|
Do this…
|
|
Enter into configuration mode
|
Place the printer in STANDBY/OFF Mode. Press and hold the FORM button. Switch the Power switch to OPERATION/ON. Continue to hold the FORM button until the ERROR light blinks slowly. Then release the FORM button.
|
|
Scroll through the configuration menu
|
Press and quickly release the FORM Button.
|
|
Change specific configuration settings
|
Press and hold the FORM Button
|
|
Exit configuration mode
|
Toggle the Power Switch
|
Table 7 How to Change Configuration Settings
|
Fax: 203.949.9048
Printers