Series 150
Manual Configuration:
This mode allows manual configuration of the printer.
To enter manual configuration mode:
1. Power the printer off.
2. Press and hold the Resume and Feed buttons down at the same time.
3. Power printer on, while still holding Resume and Feed.
4. As soon as the printer starts to print, the Resume and Feed buttons should be released.
5. The printer will print the software revision information and instructions for using manual configuration.
6. When that has finished printing, press the Resume and Feed buttons together again, and let go, and the printer will print a list of all the current settings in the printer. You are now in Manual Configuration Mode.
To navigate the Configuration Mode:
1. You will have to lift the cover to see the very last thing that printed on the paper, or tap the feed button until you get no more words on the paper. You will see on the left hand side, words that are all the same (General, Vertical, Character,…). They are groups.
2. To cycle through the different options in a group you press the Release button and let go.
3. To go to the next group you press the Resume button and let go.
4. To change an option in a group you need to press the Resume and Release buttons together, and then let go. This will print one line on the paper (next option).
Once all changes are made you must save the configuration.
To save the configuration:
1. Once you have made all your changes, then you need to press the Resume button until the last thing that prints out is “Save Changes No”.
2. Then you need to press the Resume and Release buttons together and then let go, this will change it to “Save Changes Yes”.
3. Next, press the Resume button one more time and this will store the information into the printer.
Fax: 203.949.9048
